| Flooring Systems |
Giving your event a solid foundation |
| Ring-beam cassette floor system
The Ring-beam cassette floor system is available for all party tent and big tent structures. The system consists of alloy ground floor extrusions and interlocking cassette boards.
The boards are sized at 1.00m x 2.35m for 5.00m bay distance.
All boards are fitted with a special ‘male’ and a ‘female’ extrusion screwed to each long side and these sections lock into each other when laid next to each other. When laid, the boards are positioned on the sub-floor extrusion, which runs across the span of the structure.
The sub-floor extrusion is hollow in design. This special feature is designed for two reasons. First, when used on party tent structures, 3.00m – 10.00m in span, special weights can be easily positioned within the extrusion and covered with a filler panel. Therefore, when the weights are used there is no need for earth anchors because the structure is weighted against uplift within the static calculation value specified for the party tent range. Therefore all party tent structures can be erected on any surface without the need for additional site preparation, for example drilling or using external weights in times when the ground surface cannot be damaged. Alternatively, when internal weights are not being used, standard earth anchor stakes can be used for erection on grass or hardcore etc.
Secondly, when weights are not being used or the structure is greater than 10.00m in span the extrusion is designed to carry cabling or services through the structure (internal dimension 150mm x 80mm).
|
 |
| |
Board technical specifications:
Board size (big tent structures): 1.00m x 2.35m
Board thickness: 21mm
Weight per panel (big tent): 33kg
Point loading (kgm2): 350kgm2
Standard wood type / finish: 3-ply cross-glued with smooth wood finish or non-slip surface to top with smooth underside. Exposed sides are coated and sealed to reduce water impregnation alternatively (at extra cost); the board ends can be fitted with special alloy protection guards.
|
Party Tent Wooden Flooring
- Trade hire only to experienced marquee operators.
- 3m x 500mm treated interlocking panels complete
with aluminium extrusion
- Tent on top system
|
|
|
| |
 |
